JUKI AMB-289 Engineer's Manual page 59

Procedures of disassembling / assembling
Cylinder removing procedure
1. Remove nut 2 from cylinder 1, and remove link 3.
2. Remove screw 4, remove air tube, and take out cylinder
from the machine.
3. Remove nut 5, and replace cylinder 1.
Cylinder assembling procedure
* Temporarily tighten the screw since the adjustment of position
is performed after assembling,
1. Assemble cylinder 1 to cylinder installing plate
air tube.
2. Assemble cylinder installing plate
screw 4.
3. Assemble link 3 to the cylinder rod.
Fix the dimension between the top end of cylinder rod and nut
2 to 4.5 mm.
6, and connect
6 to the machine bed with
− 55 −
Caution in disassembling / assembling
1