JUKI AMB-289 Engineer's Manual page 106

No.
Number of stitches of tie stitch at the end of sewing flat button directly to cloth.
This item sets the number of stitches of tie stitch
at the end of sewing flat button directly to cloth.
Number of stitches of tie stitch at the end of counter sewing
This item sets the number of stitches of tie stitch
at the end of counter sewing.
Button height (sewing flat/wrapped-around button with blindstitch)
This item sets the button holding height (finished
height) in the neck wrapping process.
Button height (shank/marble)
This item sets the button holding height (finished
height) in the neck wrapping process.
Button height (counter button)
This item sets the button holding height (finished
height) in the button sewing process.
Number of stitches at the start of sewing of neck wrapping
This item sets the number of stitches at the start
of sewing of neck wrapping.
Number of stitches of tie stitch at the end of sewing of neck wrapping
This item sets the number of stitches of tie stitch at
the end of sewing in the neck wrapping process.
Compensation of the button holding height at the time
of sewing flat/wrapped-around button with blindstitch
This item sets when compensating the button holding height in the button sewing
process and desiring to give slackness between button and neck wrapping section.
Thread release compensation
This item is the compensation value of the button holding height in the
button sewing process. Sewing is performed in the neck wrapping process
by gradually returning the compensation value to the former one.
This item is set when desiring to tightly wrap up to the root of the button.
Button loader selection
<In case of shank/marble button>
: Loader OFF
<In case of normal button>
: Loader OFF
Number of times of wrapping
This item sets the number of times of thread
wrapping sewing in the neck wrapping process.
Item
: Loader ON
: Loader ON
− 102
Setting range Edit unit
2 to 3 1 stitch
1 to 3 1 stitch
0.5 to 15.0 0.1mm
0 to 15.0 0.1mm
0 to 20.0 0.1mm
1 to 3 1 stitch
2 to 3 1 stitch
–5.0 to 5.0 0.1mm
–5.0 to 5.0 0.1mm
– – – – – –
0 to 5 1 time
−
Initial display Remarks
2
2
2.5
3.4
4.5
2
2
–0.5
0.5
Loader used
(Front side)
0