7.3.2 EtherNet/IP Setting Procedure
The procedure of the EtherNet/IP setting is described below.
7.3.2.1 EtherNet/IP Basic Configuration
Make the EtherNet/IP basic configuration.
Procedure of displaying the screen (Start from the menu of EtherNet/IP setting)
Select "Setting" > "EtherNet/IP Basic Cofiguration".
Auto Allocation(*1)
LD Device Starting No.
Refresh Unit
RUN/IDLE bit operation of
cyclic communication (*2)
Cyclic Communication Start
Timing
Cyclic Communication Node
Connection Wait Time
Cyclic Communication
Connection Automatic
7.3 How to Operate EtherNet/IP Setting Tool
Select from Setting.
: Set whether to use the automatic allocation of devices or
not.
When setting "Auto Allocation" to "Yes", the device
allocation for the I/O map setting and connection setting
is automatically performed.
: Set the starting device number to be allocated at the time
of the device automatic allocation.
: Set the number of data that can be refreshed by one
scan.
: Set Normal or Limited.
: Set Auto or Manual.
: Set the period of time during which retry is repeated
without error determination.
: Set the period of time during which reconnection is retried
after the occurrence of connection timeout.
The setting screen is displayed
after selecting "EtherNet/IP Basic
Configuration" from the menu.
7-9