Cyclic Communication Start Request (Eipstart) - Panasonic FP7 User Manual

9.1.3 Cyclic Communication Start Request (EIPSTART)

 Instruction format
R0
Note) A target unit for the instruction is specified with UNITSEL beforehand.
 Operation unit (i)
There is no operation unit.
 List of operands
Operand Description
S Specify the starting address storing the start request node number table.
n Specify the device address storing the maximum node number (1-256) or a constant.
Specify the device address storing execution results.
D
 Available devices (●: Available)
Operand
WX WY WR
S
● ● ● ●
n
● ● ● ●
D
● ● ● ●
 Processing
• Starts the node on which the start request is made within the maximum node number
specified by [n] from the start request node number table specified by [S].
9.1 High-level Instructions Used for EtherNet/IP Control
EIPSTART DT100
16-bit device
WL WS SD DT LD UM
● ●
● ●
● ●
U1
S n
32-bit device
TS TE
WI WO IX K
CS CE
DT2000
D
Real
Integer num- String
ber
U H SF DF " "
● ●
Index
modifier
●
●
●
9-13