Starting System Web Screen - Panasonic FP7 User Manual

Communication Status Monitoring with System Web

13.2 Starting System Web Screen

It is necessary to access and log in the FP7 web server for starting the FP7 system web
screen.
Enter a user ID (root) and password (pass) on the login screen. *
 How to access the FP7 web server
IP address/sys/
Example) 192.168.1.224/sys/
http://192.168.1.224/sys/index.html is displayed.
* When the FP7 unit is password-protected, you can only log in with a registered ID and
password.
1. Enter "User ID" and "Password" on the start-up screen and click the Login
button.
• When entering Login ID or Password failed
The following error message is displayed until the third try.
User ID or Password is invalid.
"
The following error message is displayed from the fourth try.
(The system is restored when the unit is rebooted or one hour elapses.)
"FP7 was locked because it had failed in log in three times.
Please reboot FP7.
• When the entered login ID and password are correct
The initial screen (CPU status indication > Model information) is displayed.
13-4
"
"