Setting Procedure - Panasonic SL-GU1-D Instruction Manual

7. SETTING PROCEDURE

Make sure to perform setting operations 2, 3 in the power supply off condition.
1. S-LINK system side output setting in case of upper network failure
Perform the S-LINK system side output setting for the case when data exchange cannot be
done with the master as per "8. S-LINK SYSTEM SIDE OUTPUT IN CASE OF UPPER NET-
WORK FAILURE."
2. S-LINK system side settings
Set the following items as per "3. FUNCTIONAL DESCRIPTION."
‡ Mode setting
‡ I/O channel No. setting
‡ I/O setting
‡ Status setting
3. DeviceNet side setting
Set the following items as per "3. FUNCTIONAL DESCRIPTION."
‡ Transmission speed setting
‡ Address setting (MAC ID)
4. S-LINK system address recognition
After completion of the S-LINK V\VWHP ZLULQJ FRQ¿UP WKH FRQQHFWLRQ FRQGLWLRQ DV SHU ³10. S-
LINK SYSTEM SIDE ADDRESS RECOGNITION" and "11. DISPLAY OF RECOGNIZED AD-
DRESSES."
Example of setting
1. S-LINK system side output setting in case of upper network failure
‡ All outputs maintained
2. S-LINK system side setting
‡ Mode setting: Operation mode
‡ I/O channel No.: 128 Nos.
‡ Address 0 to 63: Input, Address 64 to 127: Output
‡ Status data: Added
3. DeviceNet side setting
‡ Transmission speed: 250kbps
‡ Address (MAC ID): 42
S-LINK system side
1 output setting in case
of upper network failure
Mode switch
(RUN/CHK.)
I/O channel No. con-
trol switch (SYS.ADD.)
2
I/O setting switch
Status setting switch
(STAT./OFF)
DeviceNet transmis-
sion speed setting
switch (RATE)
3
DeviceNet address
setting switch (MAC
ID)
4 S-LINK system address recognition
7
Set to all outputs
maintained.
"RUN" side
I/O channel No.: 128 Nos.
B0: ON side
B1: ON side
Address 0 to 31 : IN side
Address 32 to 63: IN side
Address 64 to 95: OUT side
Address 96 to 127: OUT side
"STAT." side
250kbps
42
If set to all outputs maintained, decimal
points in the address display light up. (al-
ways-on)
Mode switch
I/O channel No. control switch
I/O setting switch
Status setting switch
DeviceNet transmission speed setting
DeviceNet address setting
The number of recognized S-LINK devices blinks in hexadecimal
form in the address display.
Decimal points light up