Panasonic FP7 User Manual page 35

 EtherNet/IP setting: Scan list
【Point】
To easily manage the PLC link and adapter settings, make the PLC link setting as follows.
-
(1) First, register scanner devices including the own unit.
However, the home unit is registered as an invalid (reserved) device as it does not
communication with itself.
(2) Register the adapter device connected to the own unit after the scanner devices that
the PLC link is set.
Registering scanner devices (including the own unit) and adapter devices in this
order makes the node number of each scanner device correspond with the contents
of the scanner devices 2 and 3.
 EtherNet/IP setting: I/O map
Set the data used for the PLC link with the
scanner devices 2 and 3.
Registered information of the scanner
devices 1 to 3 used for the PLC link with
the scanner device 1. (The own unit is
registered as a reserved device.)
Adapter devices connected to the scanner
device 1
Set devices to be linked with
the scanner devices 2 and 3.
6.5 Method of PLC Link
6-7