Cpu Status Indication > Ethernet/Ip Monitor - Panasonic FP7 User Manual

Communication Status Monitoring with System Web
13.4 CPU Status Indication > EtherNet/IP Monitor
Display the EtherNet/IP monitor of FP7.
Common function to each screen
- "Save" button
Saves the displayed EtherNet/IP monitor information. (CSV format)
1. When selecting "Node information" tab
• Node information (EtherNet/IP operation status monitor)
It shows the following information.
1) No. of registered nodes: (0 to 256)
2) Max. registered node number: (0 to 256)
3) Operation state of each node: (Cyclic communication:
Abnormal/- Unregistration)
Clicking the list display shows detail information (the following items) in the lower
part of the screen.
Node No., Slot No., Vendor, Status: Code and its content
When more than one error occurs within one node, the display is switched with "
▲" and "▼" buttons.
The list display is switched by selecting a node range (No. 001-099, 100-199, or
200-256).
Monitor executing/stopped button
•
Update processing is performed only once. It returns to the monitoring-stopped
state after updating data.
13-6
Detail screen display area
Normal/■
●
Stop/■