EtherNet/IP Setting Tool
If the EtherNet/IP setting is made when "EtherNet/IP Function" of the Built-in ET-LAN dialog
box is set to "Not use", the following message appears on the completion of the setting.
Selecting "Yes" changes the setting of "EtherNet/IP Function" to "Use" automatically.
* For setting "EtherNet/IP Function" to "Use", the version of the CPU unit should be Ver.4.0 or
later.
7.1.3 Restrictions and Precautions on Setting EtherNet/IP Function
Precautions on setting EtherNet/IP Function
-
If the setting of "EtherNet/IP Function" is changed to "Not use", the EtherNet/IP
setting information will be cleared.
* When the setting for Add-on is changed to "Not use", the EtherNet/IP setting information will
also be cleared like a case where the EtherNet/IP function is changed.
7-4