Panasonic FP7 User Manual page 46

EtherNet/IP Setting Tool
Reconnection Wait Time
Message Communication
Timeout
Connection Timeout
TTL for Multicast
Multicast Address Setting
Method
No. of Multicast Addresses
Multicast Starting IP Address
IGMP Query Send Enable
IGMP Query Transmission
Interval
*1: For allocating devices manually, set Auto Allocation to "No".
*2: For details of the operation of the RUN/IDLE bit in the cyclic communication, refer to "8.1.2
Cyclic Communication State Tables of EtherNet/IP".
7-10
: Set the timeout period of message communication.
: Set the connection timeout period.
: Operation setting for performing multicast transmission as
an adapter.
: Set Auto or Specify.
: Set the number of multicast addresses.
This item is valid when Multicast Address Setting Method
is specified.
: Set the starting IP address of multicast.
This item is valid when Multicast Address Setting Method
is specified.
: Set whether to make IGMP query transmission valid or
invalid.
: Set the interval of IGMP query transmission.