Target Ip Address For Unit Number Setting - Panasonic AFP7CPS Series User Manual

Setting Communication Conditions

4.2.5 Target IP address for unit number Setting

"Target IP address for unit number Setting" is available, in case of the following condtions.
 Protocol Mode：TCP or UDP (UNICAST)
 Action Mode：Client Mode
 Communication Mode：MEWTOCOL
PROCEDURE
1. Press [Option].
"Option" dialigbox will open.
2. Check the checkbox "Destination unit number and IP address is specified".
3. Double-click the line of the desired unit number.
"Target IP address for unit number setting " dialigbox will open.
4. Enter IP Address for unit number
5. Press [OK].
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com