Dual Installation - Fisher & Paykel RS1884FJ Installation Manual

Required components/tools:
ruler
● ●
Positioning and aligning the second appliance inside the cabinetry
A
Roll the second appliance into the cabinetry side by side with the first appliance. (A)
1
Continue rolling the appliance into the cabinetry until the anti-tip bracket overlaps
2
[minimum 7 1/8" (180mm)] the back top surface of the appliance. (Refer to 'Attach the anti-
tip bracket').
Check the clearance between the floor and the feet. Ensure the rollers of the appliance can
3
roll freely on the floor.
Align the top cap of the second appliance flush with the central spacer and top cap of first
4
appliance (B).
!6

DUAL INSTALLATION

D
Mark the step (C) of each alignment gauge based on the thickness of the door panel to be
5
installed to the door.
Align the marked steps of the gauges flush with the edges of the cabinetry side walls.
6
– Place a ruler on the steps of the alignment gauges to check if they are in line (D)
relative to the thickness of the door panel.
Check if the gaps between appliance and cabinetry side wall are even.
7
B
C
27