Fisher & Paykel RS1884FJ Installation Manual page 40

Required components/tools:
1x top trim
● ●
Install the top trim
Slide the top trim into hinge pocket of the cabinet (A),
1
and then engage the dual lock at the non-hinge side (B).
A
B
38
@3 INSTALL CABINET TRIMS
Required components/tools:
1x center trim
● ●
Install the center trims (for dual install only)
Note: Four (4) dual-lock strips are pre-installed along the center trim.
Peel off the liners from the dual-lock strips. (C)
1
C
Push and press the trim on the appliances/throat (E).
3
Note: Make sure the top end of the trim is pushed up
against the alcove ceiling before fixing the position
E
Position the trim between the throats of both cabinets. (D)
2
D
Press the center trim to fix the position. (F)
4
F