Fisher & Paykel RS1884FJ Installation Manual page 31

Required components/tools:
top joiner fastener kit (848313)
● ●
– 1x M5x20 cap screw (847984)
– 1x M5x16x1 plain washer (611307)
Fixing the second appliance inside
the cabinetry
1 Fix the top caps of first and second
appliances to the central spacer with
the top joiner fastener kit (A).
Fix the bottom joiner brackets of both
2
appliances together with the bottom
joiner kit (B).
Place the plastic washers between
—
●
the bottom joiner brackets before
fixing with the screw and nut.
Tighten with M4 hex key.
Fix the top brackets (C) and bottom
3
alcove side bracket (D) of the second
appliance to the cabinetry with .
8Gx16 countersunk screws.
Do final alignment check. Ensure the
4
feet of both appliances are positively
engaged with the floor.
!6 DUAL INSTALLATION
Bottom joiner fastener kit (848312)
● ●
– 1x M6x16 washer screw (848869)
– 2x M6x12x3.2 plastic washer (848870)
– 1x M6 hex nut (839455)
A
Top joiner brackets
with central spacer
B
Bottom joiner brackets
5x 8Gx16 countersunk screw (840597)
● ●
M4 hex key (844124)
● ●
C
A
B
Note: Image shows 30" second appliance with 2 top brackets.
C
C
D
Alcove side bracket
D
29