Table of Contents
Advertisement
Install fasteners kit
Attach central spacer to cabinetry
Cabinet depth alignment
gauges (4)
Top joiner
bracket kit
Central spacer
(1)
8Gx16 Mush washer
screw (2)
Tools
Cross-head screwdriver
Powered driver (optional)
58
DUAL INSTALLATION
A
b
1 Measure the widths from the left (A) and right (B) cabinetry
sides towards the centre to determine the spacer location.
Refer to "Cavity dimensions' page for correct width of the
appliance.
2 Mark the attachment location of the central spacer on the
cabinetry ceiling using the depth alignment gauge (C).
The depth position of spacer depends on the door panel
z
thickness.
3 Fix a central spacer (C) to the alcove ceiling with
two 8Gx16 countersunk screws.
C
4 Tighten the screws with a screwdriver or powered driver.
Advertisement
Table of Contents
