When entering this setting function, the first
parameter to be set is AM / PM (flashing) (A). Use
buttons (1) and (2) to toggle from "AM" to "PM" and
vice versa.
Press button (4) to shift to hour (flashing) setting (B).
Use buttons (1) and (2) to increase and decrease by 1
the hour value.
Press button (4) to shift to minute (flashing) setting
(C). Use buttons (1) and (2) to increase and decrease
by 1 the minute value.
Press button (4), "EXIT" is selected (flashing frame).
It is now possible to repeat time setting or go back to
the previous page of the Setting Menu by pressing
button (4) with "EXIT" selected (flashing frame).
90
A
B
C
1
4
2
Fig. 63