Table of Contents
Advertisement
Front fork adjustment (SCRAMBLER 1100
SPORT)
The front fork used on this motorcycle has rebound
(return), compression and spring preload adjustment.
Adjustment is done by external screw adjusters:
- for rebound damping adjustment (1) (left leg);
- for compression damping adjustment (2) (right leg);
- for inner spring preload adjustment (3).
Put the motorcycle on the side stand and make sure it
is stable.
Turn adjuster (1) at the top end of the left leg with a
hexagon wrench to adjust rebound damping.
Turn adjuster (2) at the top end of the right leg with a
hexagon wrench to adjust compression damping
Turn adjusters (1) and (2) to adjust damping.
Turn screw fully in to get the maximum rebound (1) or
compression (2) damping.
While turn it out to reduce rebound (1) and
compression (2) damping.
To change preload of the spring inside each fork leg,
turn the hex. adjuster (3), with a hexagon wrench,
starting from the fully open (clockwise) position.
STANDARD settings
- Rebound: open 16 clicks from fully closed position;
170
+
-
2
+
-
2
Fig. 140
Fig. 141
Advertisement
Table of Contents
