Table of Contents
Advertisement
Gear
The instrument panel receives information about the
gear engaged and displays the corresponding value.
If a gear is engaged, the displayed value may range
from 1 to 6, while if in neutral N is displayed and the
Neutral warning light (2, turns on.
Letter "C" and Neutral (warning light 2, will be shown
flashing if the gear teach-in procedure has not been
performed yet.
A dash "-" is displayed in these cases:
-
dash "-" and Neutral (warning light 2, flashing if
the instrument panel does not receive the gear
information;
-
dash "-" steady and Neutral (warning light 2,
flashing in case of fault;
-
dash "-" steady if gear information is not stable.
48
Note
If the display shows the dash steady on and the
Neutral light is off, then the gearbox could be in a
mechanically unstable position. Up/downshift until
the correct gear is indicated.
Fig. 18
Advertisement
Table of Contents
