Table of Contents
Advertisement
When you press button (4) to confirm the fourth and
last digit (C, Fig. 52), the instrument panel responds
as follows:
-
if the PIN is not correct, the instrument panel
shows "ERROR" flashing for 2 seconds. After
these 2 seconds, "EXIT" is selected (flashing
frame). Now press button (4) to quit PIN CODE
Modification function or use buttons (1) and (2) to
select and try again to enter the old code
(A, Fig. 52)
-
if the PIN is correct, the instrument panel shows
"OK" for 2 seconds, and then displays the page
for entering the new code.
Note
There is no limit to the number of attempts to
enter the existing PIN CODE
1
4
2
Fig. 53
1
4
2
Fig. 54
83
Advertisement
Table of Contents
