Table of Contents
Advertisement
Electric system
Basic electric items are:
Headlight:
low beam: H4 Blue Vision bulb 12V – 60/55W OSRAM
64193;
high beam: H4 Blue Vision bulb 12V – 60/55W
OSRAM 64193;
parking light/DRL (where fitted); no. 4 LEDs STANLEY
HCNW115AJTE;
Front / rear turn indicators (Europe Version): No.1 LED
CREE CLM2B-AEW-Z0A0B0;
Front / rear turn indicators (USA Version): 12V RY10W
bulb.
Tail light:
LED parking light: no.12 LEDs OSRAM E6SF + no. 6
LEDs G6SP .
Number plate LED lighting: no.3 LEDs CREE CLA1A.
Instrument panel: LCD display.
Generator: 14V - 487W.
Battery: 12V-10 Ah, dry.
Electronic rectifier, protected by a 30A fuse located
next to fuse box (C, Fig. 192).
Starter motor: 12V-0.7 kW (700 W).
Horn.
Stop light switches.
Note
For bulb replacement instructions, please see
the paragraph "Replacing the high and low beam
bulbs".
Fuses
There are seven fuses that protect the electric
components, located inside the fuse box, and one on
the solenoid starter. The fuse box includes two spare
fuses.
Refer to the table below to identify the circuits
protected by the various fuses and their ratings.
The fuse boxes (A) and (B) are located under the seat,
so it is necessary to remove the seat and the battery
cover to reach them.
To expose the fuses, lift the box protective cover.
Mounting position and ampere capacity are marked
on box cover.
237
Advertisement
Table of Contents
