Ducati Scrambler 1100 Owner's Manual page 137

Low/high beam (version with DRL)
At Key-On, the high beam and low beam lights are
OFF: only the parking lights and the DRL light are
turned on.
After starting the engine the high beam is
automatically turned on if the AUTO mode is set and
the instrument panel detects poor ambient light
(NIGHT): if, on the other hand, the instrument panel
detects good light conditions (DAY), the DRL light
remains on and the low beam remains off; it is
possible to switch the DRL light to low beam (and vice
versa) with button (5).
It the low beam is activated, it is possible to switch on
the high beam with button (7), position (A). If engine is
not started upon key-on, it is anyway possible to
switch high/low beams on by pushing button (7)
positions (B) and (A) on LH switch.
If within 60 seconds from the "manual" switching on
of the low / high beam the engine is not started, the
lights are disabled again (off).
136
A
7
B
5
Fig. 108
Fig. 109