Ducati Scrambler 1100 Owner's Manual page 34

FCC/ISED certifications
The manufacturers of this radio equipment declare that the devices comply with the FCC and ISED standards.
FCC ID
Bluetooth Z64-2564N
DSB 2ANYI-DSB1402
To meet the FCC and ISED compliance requirements on the exposure to radio-frequency fields, there must be
a separation distance of at least 20 cm between the antenna of these devices and the people nearby.
FCC certification
These devices comply with Part 15 of FCC Regulations. The operation is subject to the two conditions below:
(1) these devices will not have to generate harmful interference and (2) these devices will have to accept any
received interference, including those that could cause an undesired operation.
FCC § 15.105 Information for user's declarations
This equipment has been tested and turned out to be compliant with the limits set for the class B digital
devices according to Part 15 of the FCC Regulations. These limits have been set to ensure a reasonable
protection against harmful interference in residential installations. This equipment generates, uses and can
emit radio-frequency energy and, if not installed and used according to the instructions, can generate harmful
interference to the radio communications. Nevertheless, it cannot be ensured that interference might occur
in special installations. Should this equipment generate harmful interference to the radio or TV reception,
which can be detected by turning the equipment OFF and ON, the user will have to attempt remedying this
interference in one of the following ways:
IC ID
4511-2564N
23285-DSB1402
33