Table of Contents
Advertisement
When entering the function, the currently set DTC
intervention level starts flashing (Fig. 39). Use
buttons (1) and (2) to cyclically select the values "-"
(DTC OFF), "1", "2", "3", "4" and "EXIT" with flashing
frame.
Once the new level for the DTC parameter is
selected, press button (4).
The instrument panel displays the new set level and
"EXIT" with flashing frame (Fig. 40). Now press button
(4) to go back to previous display mode.
Note
By setting "– " (Off), the DTC will be disabled.
If the DTC function is disabled and hence set to level
"-" (DTC OFF) the DTC
the instrument panel turns on.
(12, Fig. 6) warning light on
1
4
2
Fig. 39
1
4
2
Fig. 40
73
Advertisement
Table of Contents
