Nexcom NEX 614A User Manual page 40

Chapter 3: BIOS Setup
Intel (VMX) Virtualization Technology
®
When this field is set to Enabled, the VMM can utilize the additional
hardware capabilities provided by Vanderpool Technology.
Active Processor Cores
Select the number of cores to enable in each processor package.
Intel ® SpeedStep TM
Enables or disables Intel SpeedStep.
C states
Enables or disables CPU to go to C states when it is not 100% utilized.
Enhanced C-states
Enables or disables C1E. When enabled, CPU will switch to minimum speed
when all cores enter C-State.
Package C State Limit
Configures the maximum package C state limit setting.
Cpu Default Leaves to factory default value.
Auto Initializes to deepest available package C state limit.
Copyright © 2018 NEXCOM International Co., Ltd. All Rights Reserved.
PCH-FW Configuration
This section displays the firmware information.
Aptio Setup Utility - Copyright (C) 2017 American Megatrends, Inc.
Advanced
ME Firmware Version
ME Firmware Mode
ME Firmware SKU
ME File System Integrity Value
ME Firmware Status 1
ME Firmware Status 2
NFC Support
ME State
Version 2.18.1263. Copyright (C) 2017 American Megatrends, Inc.
26
11.7.0.3307
Normal Mode
Corporate SKU
2
0x90000255
0x80108306
Disabled
[Enabled]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NEX 614A User Manual