Connecting The Universal Supply Module To An Hid Device; Connecting The Universal Supply Module To A Plc - Bartec BCS 3608ex-NI User Manual

7 Connection /
commissioning (qualified
personnel)
7.2.2

Connecting the universal supply module to an HID device

7.2.3

Connecting the universal supply module to a PLC

48 / 72
All interfaces used on the universal supply module (USB, RS232, RS422 and RS485) can be
connected to an HID device.
The prerequisite is a software wedge application on the PC / host using which the interface data can
be converted into USB-HID. Software wedge applications are not supplied by BARTEC, but they are
available on the market (e.g. T-Wedge).
All interfaces used on the universal supply module (USB, RS232, RS422 and RS485) can be
connected to a PLC.
The available interfaces depend on your PLC.
Solution 1: availability on the PLC side
Fig. 14: Availability on the PLC side
Communication controller / processor (CP)
‒
Open ASCII driver
‒
Handscanners
BCS 3600 series
ex
Subject to technical modifications
17/05/18