Setting The Dip Switches; Ranges / Maximum Cable Length Of Connected Cable From The Universal Supply Module To The Host Or Pc; Permissible Core Cross-Sections - Bartec BCS 3608ex-NI User Manual

Handscanners
BCS 3600 series
ex
4.6.2

Setting the DIP switches

4.6.3

Ranges / maximum cable length of connected cable from the universal supply module to the host or PC

4.6.4

Permissible core cross-sections

Subject to technical modifications
17/05/18
The DIP switches (X18) must be set as follows depending on the interface used
Fig. 12: DIP switches and switch positions
Setting
Interface S1
RS 232 0
RS 422 0
RS 485 0
USB 1
Tab. 18: Setting
Interface
RS 232
RS 422
RS 485
USB
Tab. 19: Ranges / maximum cable length of connected cable
Description of the conductor
Rigid
Flexible
Flexible with wire end ferrule, without plastic
sleeve
Flexible with wire end ferrule, with plastic sleeve 0.25 mm
Wire diameter (AWG)
Tab. 20: Permissible core cross sections
S2 S3
0 0
1 1
0 1
1 1
Range
20 m / 66 ft
1000 m / 3280 ft
1200 m / 3937 ft
5 m / 16 ft
Permissible core cross-section
0.08 mm - 2.5 mm
2
0.08 mm - 2.5 mm
2
0.25 mm - 1.5 mm
2
- 1.5 mm
2
28 - 12 kcmil
4 Product description
S4
0
0
0
0
66 ft.
3280 ft.
3937 ft.
16 ft.
28 – 14 AWG
2
28 – 14 AWG
2
24 – 16 AWG
2
24 – 16 AWG
2
36 – 39 AWG
33 / 72