Placing The Hand-Held Scanner In The Cradle - Bartec BCS 3608ex-NI User Manual

8 Operation
8.1.2

Placing the hand-held scanner in the cradle

54 / 72
DANGER
Non-approved cradle!
Loss of function and risk of explosion.
Only use the cradle that has been specified for the relevant configuration by BARTEC.

The approved accessory is shown in the system overview (see system overview, Chapter 15.2,
P. 70). The model is clearly indicated on the type label.
DANGER
Spark formation!
Explosion.
Only use the cradle outside the potentially explosive atmosphere.

1. Place the head of the hand-held scanner in the cradle.
2. Press the underneath of the hand-held scanner into the cradle until you hear the hand-held
scanner click into place.
Handscanners
BCS 3600 series
ex
Subject to technical modifications
17/05/18