Handscanners
BCS 3600
series
ex
2.2
Personnel qualifications
2.3
Explosion protection
2.3.1
Using hand-held scanners and accessories
Subject to technical modifications
17/05/18
The following skills are required for handling the device:
Target group
Qualified electricians
IT specialists
Warehouse and transport employees
Operators
Tab. 5:
Personnel qualifications
Incorrect use of the hand-held scanner and its accessories can trigger fires and explosions in
potentially explosive atmospheres.
Read the instructions in this Manual thoroughly and follow them when using the device.
In the event of an overlaps with user manuals from Zebra, the instructions in the BARTEC User
Manual apply. The BARTEC User Manual takes priority.
Always carry out an inspection prior to use (see Chapter 8.2, P. 58).
Ensure that the application area corresponds to the explosion protection marking and
permissible ambient conditions (see chapter 14, P. 69).
Remove the device from the potentially explosive atmosphere immediately in the event of a
malfunction or damaged enclosure.
Only use accessories specified by BARTEC in the potentially explosive atmosphere.
Have all maintenance work on and inspections of accessories conducted by authorised personnel.
Have all repairs to the hand-held scanner conducted by BARTEC.
Skills
Professional training
Knowledge and experience to recognise and
avoid risks that can emanate from electricity
Understanding of the overall system
Special instruction for potentially explosive
atmospheres
Understanding of the overall system
Configuration/programming
Understanding of programming manuals
Loading and transport activities
Correct storage
Instruction by the operating company on
operation, changing and loading the battery
Special instruction for potentially explosive
atmospheres
2 Safety
13 / 72