Construction Of 4-Slot Charging Station For Spare Batteries - Bartec BCS 3608ex-NI User Manual

4 Product description
4.4.5

Construction of 4-slot charging station for spare batteries

28 / 72
Pos. Description
7 Page button
8 Retainer
9 Drill hole
10 Hole
11 Connection
12 Rubber feet
13 Drill holes
14 Adjusting screw
15 Cable routing
16 Connection
17 Cover
18 Drill holes
19 Rubber feet
DANGER
Spark formation!
Explosion.
Only use the 4-slot charging station outside the potentially explosive atmosphere.

The function is only guaranteed if the 4-slot charging station you use for your configuration has
been specified by BARTEC (see system overview, Chapter 15.2, P. 70).
The model is clearly indicated on the type label.
Handscanners
BCS 3600
Function
Connected hand-held scanners transmit a
beep when the page button has been
pressed
Holding the hand-held scanner in the
cradle
Mounting the cradle to the wall
Water drainage
Connecting connection cable to cradle
Prevent the cradle slipping
Mounting the cradle to the wall
Adjusting retainer to wall mounting or for
use on the desk top
Feeding the connection cable to the
connection
Protecting the connection
Relieving the strain on the connection
cable
Mounting the cradle to the wall
Prevent the cradle slipping
Subject to technical modifications
series
ex
17/05/18