Advertisement
2002-2003 Kawasaki ZX-12R
Parts List
1
Power Commander
1
USB Cable
1
CD-ROM
1
Installation Guide
1
Power Adapter
2
Power Commander Decals
2
Dynojet Decals
1
Velcro
Strip
®
1
Alcohol Swab
The ignition MUST be turned
OFF before installation!
You can also download the Power
Commander software and latest maps
from our web site at:
www.powercommander.com
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com
i206-411
Installation Instructions
Button Adjustment Display
Faceplate Buttons
Expansion Port
USB Port
2002-2003 Kawasaki ZX-12R - PCIII USB - 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dynojet power commander III
Summary of Contents for Dynojet power commander III
-
Page 1: Installation Instructions
Commander software and latest maps from our web site at: www.powercommander.com PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89031 (800) 992-4993 www.powercommander.com i206-411 2002-2003 Kawasaki ZX-12R - PCIII USB - 1... - Page 2 Remove the passenger seat or solo Separate this seat cover section. connector Remove the main seat. Remove the fuel tank shell and prop the front of the fuel tank up. Disconnect the fuel injector connector shown in Fig. A. This connector is located on the backside of the frame towards the bottom of the fuel tank.
- Page 3 Plug the connectors from the Power Commander in line of these connec- Plug the main power wire from tors. (Fig. D). the Power Commander into the rear brake light connectors Connect the ground wire from the Power Commander to the negative side of the battery (Fig.
Need help?
Do you have a question about the power commander III and is the answer not in the manual?
Questions and answers