Additional Installation Components To Purchase; Required Parts And Tools; Figure 3, Microgt 500S In A Pv Array - Magnum Energy MicroGT 500 Owner's Manual

Figure 3, MicroGT 500s in a PV Array

Additional Installation Components to Purchase

• AC connector cable (PN: ME-MGT-AC-F, x1/branch)
• AC extension cable (PN: ME-MGT-AC-EXT, if required)
• AC female endcap (PN: ME-MGT-ENDCAP-F, x1/branch)

Required Parts and Tools

In addition to your PV array and its associated hardware, the
following tools are required for assembly:
• One AC connection junction box per branch circuit
• Mounting hardware suitable for module racking
• Sockets and wrenches for mounting hardware
• Continuous grounding conductor and grounding washers
• Phillips screwdriver
• Torque wrench
Note: MicroGT 500 inverters are designed to only operate when they
can sense power coming from the grid. Even if they are plugged into
the PV array, they will not turn themselves on until they can read
power from the grid.
WARNING: DO NOT connect the MicroGT 500 inverters
to the utility grid or energize the AC circuit until you have
completed all of the installation procedures.
BENEFITS OF ADDING A MAGWEB GT TO YOUR PV SYSTEM
Magnum's MagWeb GT (ME-MGT-MW) is the information gateway for
your MicroGT 500 inverter system—it collects module performance
data from each individual MicroGT
installed, simply plug it into any wall outlet and provide an Ethernet
or Wi-Fi connection to a broadband router or modem. The MagWeb
GT's software displays performance trends, informs you of abnormal
events, and controls system shutdown when needed.
© 2016 Sensata Technologies
inverter. The MagWeb GT is easily
Installation
3