Rate Of Change; Setpoint Entry; 1.10 Softkey Operations - Rice Lake 1280 Enterprise Series Operation Manuals

1.8

Rate Of Change

Rate of change is expressed in weight per time unit (weight/time).
Example: lb/sec
See the 1280 Technical Manual for information on how to enable rate of change.
To view the rate of change:
1. Press the
Display Rate of Change
2. To return to the live weight, press
1.9

Setpoint Entry

Setpoints can be configured to perform actions or functions based on specified parameter conditions. For more
information on setpoints, see the 1280 Technical Manual.
To change the setpoint value:
1. Press .
Setup
2. Press the
Setpoint Values
3. Press to select the setpoint (1-100) for which the target value needs to be changed.
Setpoint 1
4. Press the red number of the setpoint in the table. It may be necessary to use the arrows at the bottom of the
screen scroll through the setpoints.
5. Press to bring up the numeric entry keypad.
Value
6. Enter the new target value and press
7. Press to toggle between enabled and disabled.
Settings
8. Press and
Done Save and Exit

1.10 Softkey Operations

Softkeys are configured to provide additional operator functions. Softkeys are displayed as digital buttons at the
bottom of the touch screen display area. See Figure 1-1 on page 3.
See the 1280 Technical Manual for softkey configuration.
Softkey
Blank Inserts a blank key between assigned softkeys.
Time/Date Allows time and date change.
Display Tare Displays a tare value for the current scale.
Display Accum Displays an accumulator value, if enabled, for the current scale.
Display ROC Displays a rate-of-change value, if enabled, for the current scale.
Setpoint Displays a list of configured setpoints; allows change to target and enable parameters.
Batch Start Starts a configured batch.
Batch Stop Stops a running batch and turns off all associated digital outputs. Requires a batch start to resume processing.
Batch Pause Pauses a running batch, deactivating current batch digital outputs except those associated with concurrent and
timer setpoints. A batch start is required to to resume the batch.
Batch Reset Stops a batch and resets it to the first batch step.
Unit ID Displays the name given to the 1280.
Scale Select Prompts for the scale number desired for multi-scale applications.
Diagnostics Future sofkey
Alibi Previous print transactions can be recalled and reprinted.
Contrast Adjusts the screen's backlight if set to manual.
Stop Sends AuxFmt13 out a configured port to prompt a red light on a LaserLight.
Go Sends AuxFmt12 out a configured port to prompt a green light on a LaserLight.
Off Sends AuxFmt14 out a configured port to turn a LaserLight red/green light off.
Screen Allows multiple display screens without a user program.
F1–F10 These are user-programmable keys; defined by application.
< or > For applications with more than five defined softkeys, the < or > softkeys are automatically assigned to the fifth
softkey position. If there are more keys to the right the > softkey will appear, if there are more keys to the left, the
< softkey will appear. Press < or > to toggle between groups of softkeys.
10 1280 Enterprise Series
softkey.
Display Rate of Change
key in the Main menu or from the black drop down list, or press the
.
Done
.
Table 1-4. Configurable Softkeys
again.
Description
softkey.
Setpoint