Rice Lake Enterprise 1280 Series Installation Manual

1280 Enterprise
™
Interface Option Card Installation
Due to a program change in this device, the SWAP parameter may need to be changed from NONE to BYTE or
IMPORTANT
BYTE to NONE.
This change affects Ethernet/IP, PROFINET, PROFIBUS and DeviceNet.
See the 1280 technical manual (PN 167659) or the 880 technical manual (PN 158387) for complete instructions on opening the
applicable indicator enclosure and the necessary ports for connecting to the CPU board.
Manuals and additional resources are available from the Rice Lake Weighing Systems website at
Warranty information can be found on the website at
Always disconnect the power before opening an enclosure. Interface option cards are not hot swappable.
WARNING
A grounding wrist strap must be worn to protect components from electrostatic discharge (ESD) when working
CAUTION
inside an enclosure or controller assembly.
The interface option cards of the 1280 Enterprise Series and 880 universal and panel mount indicators share the same carrier
board (PN 164756). The carrier board plugs into an open slot on the CPU board and provides power and access from the
indicator bus to the module. The assembly steps of the carrier board and modules vary between the 1280, 880 universal mount,
and 880 panel mount.
• 1280 interface option card kits are shipped with the module and the carrier board already assembled
• 880 interface option card kits are shipped with the module and carrier board separated
― 880 universal mount module can be assembled to the carrier board before installing
― 880 panel mount carrier board must be installed before assembling the module to the carrier board
The indicator automatically recognizes all installed option cards when the unit is powered on. No hardware-specific
configuration is required to identify an installed card to the system.
See the corresponding module's Installation and Programming Manual for configuration and data commands:
November 21, 2019
Series and 880 Universal and Panel Mount Indicators
Carrier Board
Figure 1. Interface Option Card Kit
Option Card
®
Modbus TCP
®
DeviceNet
PROFIBUS DP
™
EtherNet/IP
®
EtherCAT
PROFINET
Table 1. Manual and Option Card Kit Part Numbers
www.ricelake.com/warranties
Carrier Board with Module
Manual 1280 Kit 880 Kit
Part No. Part No. Part No.
156782 165796 179161
156783 165793 179162
156784 165795 179163
156861 165792 179159
164394 179533 179158
156781 165794 179160
www.ricelake.com
PN 198245