Table of Contents
Advertisement
Trouble Shooting BIOS Settings
It may happen that the BIOS is configured that the Cool LiteRunner-LX800 does not start at all. To
repair this, the default values of the BIOS can be automatically loaded at boot time. To load these,
the power must be switched on and off again within 2 seconds. This sequence must be repeated 5
times, then the default values get loaded by the BIOS.
Power
On
Off
Pressing the Reset-Button five times while the system is booting achieves the same result.
TME-104-CLR-LX800-R1V3.doc
1
2
≤ 2s
Rev. 1.3
3
4
5
43(53)
Advertisement
Table of Contents
