Field Selection
To move between fields in Setup, use the keys listed below:
,
Enter
In order to save your settings, select Save values and Exit and confirm with Y.
Should you want to discard everything, select Exit Without Save.
When troubleshooting a system, it is highly recommend to first restore the BIOS's factory settings
before any debugging is done. This is achieved with Load Defaults in the main setup menu.
The Motherboard Device Configurations menu allows to configure the drives, LPC, DDMA,
display, GPIO usage, and PCI configuration. The CPU's temperature can be read here, too.
TME-104-CLR-LX800-R1V3.doc
Key
Function
,
,
Move between fields
+, -
Selects next/previous values in fields
Go to the submenu for the field
Esc
To previous field then to exit menu
Rev. 1.3
36(53)