Table of Contents
Advertisement
The Boot Order menu specifies the order in which the BIOS tries the various mass memory devices
for a bootable operating system. Boot over LAN is also supported.
Trouble Shooting BIOS Settings
It may happen that the BIOS is configured that the Cool SpaceRunner-LX800 does not start at all. To
repair this, the default values of the BIOS can be automatically loaded at boot time. To load these,
the power must be switched on and off again within 2 seconds. This sequence must be repeated 5
times, and then the default values get loaded by the BIOS.
Power
1
On
Off
≤ 2s
Pressing the Reset-Button five times while the system is booting achieves the same result.
4.2 Drivers
Software drivers for Ethernet, AES and graphics adapter are available for the Cool SpaceRunner-
LX800.
These drivers can be downloaded from LiPPERT's website http://www.lippertembedded.com.
Follow the installation instructions that come with the drivers.
TME-104P-CSR-LX800-R1V5.doc
2
3
Rev 1.5
4
5
37 (44)
Advertisement
Table of Contents
