Table of Contents
Advertisement
The Serial and Parallel Device Configurations menu allows to configure COM1, COM2, COM3
and LPT1.
COM-Ports 1 and 2 can be switched between RS232 and RS485. It is possible to chance the resource
and interrupts of all ports.
Hard Drive Setting
TME-104-CLR-LX800-R1V3.doc
Serial Port 1/2
Serial Port 3
Serial Mode
Parallel Port
Parallel Mode
Parallel IRQ
Parallel DMA
Rev. 1.3
Options
Disabled, 0x3f8 IRQ 4, 0x2f8 IRQ 3,
0x3e8 IRQ4, 0x2e8 IRQ3
Disabled, 0x3f8, 0x2f8, 0x3e8 0x2e8
IRQ 5,6,7,9,10,11,15
SIR/CIR, RS485 16550 compatible,
RS485 extended
RS232, RS485
Disabled, 0x378, 0x278, 0x3BC
Compatible, PS/2 Bi-directional,
EPP 1.7, EPP 1.9, ECP
Disabled, IRQ5, IRQ7, IRQ9, IRQ10,
IRQ11
Channel 1, Channel 3, none
38(53)
Advertisement
Table of Contents
