Table of Contents
Advertisement
The Drive Configuration menu allows to configure connected EIDE devices.
An IDE device can be disabled that its power stays off after restart.
With the help of 80-Conductor Cable Sense the access system memory mode of an device is set.
For running a device in UDMA-4 mode a 80 pin cable is required. The GPIO 05 option should detect
that automatically. If it does not, there is the option to select it manually too.
Hard Drive Setting
80-Conductor Cable Sense
TME-104-CLR-LX800-R1V3.doc
Drive Modes
Rev. 1.3
Options
GPIO 05, NONE, Force 40, Force 80
Auto, PIO0, PIO1, PIO2, PIO3, PIO4,
MDMA0, MDMA1, MDMA2, UDMA0,
UDMA1, UDMA2, UDMA3, UDMA4
37(53)
Advertisement
Table of Contents
