1.4 Mechanical
Dimensions (LxW)
Height
Weight
Mounting
TOP
Pin1
TME-104-CLR-LX800-R1V3.doc
95.9 mm x 90.2 mm (including I/O extension)
max. 14 mm on topside above PCB
max. 12 mm on bottom side above PCB
102 gramme
4 mounting holes
Note: It is strongly recommend using plastic spacers instead of metal spacers to
mount the board. With metal spacers, there is a possible danger to create
a short circuit with the components located around the mounting holes.
This can damage the board!
Pin2
Rev. 1.3
5(53)