3.8 PS/2 Interface
PS/2-connectors for mouse and keyboard are shared with several system signals.
An adapter cable for the PS/2 devices is available.
Keyboard and Mouse Connector
Connector type IDC10 pin header 2.54 mm
3.9 USB 2.0 Ports
Four standard USB 2.0 host ports are provided at the with CLR-LX800. The first is located on the
IDC10 header "Ethernet" and the second on the IDC10 header "Audio"
The other two ports are located on the separate DF13 8 pin header "USB".
An adapter cable for all ports is available to use standard USB devices
It is possible to use an USB keyboard under MSDOS without special driver software.
TME-104-CLR-LX800-R1V3.doc
Pin
Signal
1
Speaker
3
Reset-In
5
KB Data
7
GND
9
Ext. Battery
Note:
Not all USB keyboard models are supported.
Rev. 1.3
Pin
Signal
2
Mouse Clock
4
Mouse Data
6
KB Clock
8
+5 Volt Standby
10
Reset-In/ Power
Button
22(53)