Table of Contents
Advertisement
Chapter 5 Using the Web Client to Configure the D9887B Receiver
Login
To login to the remote web client for the D9887B receiver, use the following steps:
1
Open an Internet Explorer browser window or a Firefox browser window, then
type the IP address of the D9887B receiver into the address box and press Enter.
Note: The IP address of the D9887B receiver can be found from the front panel
"Network Setup" settings, see Network Setup (on page 152).
2
Select either the "admin (read-write)" or "user (read-only)" Username, and enter
the associated password. Press the Login button to log into the D9887B receiver.
Note: By default, there is no password.
Note: If the password was changed (see Web Passwords (on page 188)) it can be
recorded in the provided space below.
Password:__________________________
170
78-4043743-01 Rev A
- Quick Links:
- D9887B Receiver
Hide quick links:
Advertisement
Table of Contents
