Cisco D9887B Installation And Configuration Manual page 56

Chapter 4 Using the Front Panel to Configure the D9887B HDTV Modular Receiver
Select Format Setting
When in "Auto" mode, the unit will automatically pick the format which is closest to
the native format of the decoded video in the elementary stream. When in "Manual"
mode, the format may be selected from the list of available output formats listed
under "Video Format" below.
1 Use the Up and Down buttons to move the cursor to "Select Format," then press
the Enter button.
2 Use the Up and Down buttons to select either "Auto" or "Manual" mode, then
press the Enter button to save the selection.
Video Format
Note: This menu is only available if the "Select Format" option is set to "Manual."
1 Use the Up and Down buttons to move the cursor to "Format," then press the
Enter button.
2 Use the Up and Down buttons to select the appropriate output format, then
press the Enter button to save the selection.
720x480i
720x480i
720x576i
720x576i
1280x720p
32
16x9 29.97 1280x720p
4x3 29.97 1280x720p
16x9 25.00 1920x1080i
4x3 25.00 1920x1080i
16x9 50.00 1920x1080i
16x9 59.94
16x9 60.00
16x9 25.00
16x9 29.97
16x9 30.00
78-4043743-01 Rev A