Cisco D9887B Installation And Configuration Manual page 71

Select Format Setting
When in "Auto" mode, the unit will automatically pick the format which is closest to
the native format of the decoded video in the elementary stream. When in "Manual"
mode, the format may be selected from the list of available output formats listed
under "Video Format" below.
1 Use the Up and Down buttons to move the cursor to "Select Format," then press
the Enter button.
2 Use the Up and Down buttons to select either "Auto" or "Manual" mode, then
press the Enter button to save the selection.
Video Format
Note: This menu is only available if the "Select Format" option is set to "Manual."
1 Use the Up and Down button to move the cursor to "Format," then press the
Enter button.
2 Use the Up and Down buttons to select the desired output format, then press the
Enter button to save the selection.
720 x 480i
720 x 480i
720 x 576i
720 x 576i
1280 x 720p
1280 x 720p
1280 x 720p
1920 x 1080i
1920 x 1080i
78-4043743-01 Rev A
Dual Video Output (2 SDI, 1 RGBHV/YPbPr/Composite) Option
16x9 29.97 1920 x 1080i
4x3 29.97 1920 x 1080PsF
4x3 25.00 1920 x 1080PsF
16x9 25.00 1920 x 1080p
16x9 60.00 1920 x 1080p
16x9 59.94 1920 x 1080p
16x9 50.00 1920 x 1080p
16x9 25.00 1920 x 1080p
16x9 29.97
16x9 30.00
16x9 23.98
16x9 24.00
16x9 23.98
16x9 24.00
16x9 25.00
16x9 29.97
16x9 30.00
47