Table of Contents
Advertisement
Chapter 4 Using the Front Panel to Configure the D9887B HDTV Modular Receiver
DHCP
The D9887B receiver can be configured to use DHCP to obtain an IP address/Subnet
Mask/Gateway.
1
Use the Up and Down buttons to move the cursor to "Dhcp," then press the
Enter button.
2
Use the Up and Down buttons to change the selection to "on," then press the
Enter button to save the selection.
Note: It may take up to a minute for the D9887B receiver to obtain an IP address.
During this time the unit will display a "busy" message next to DHCP.
154
78-4043743-01 Rev A
- Quick Links:
- D9887B Receiver
Hide quick links:
Advertisement
Table of Contents
