Small Format Display - Cisco D9887B Installation And Configuration Manual

Color Reference
Note: The Color Reference is only available when the Genlock reference is SD.
1 Use the Up and Down buttons to move the cursor to "Color ref," then press the
Enter button.
2 Use the Left and Right buttons to select the column to edit and use the LUp and
Down buttons to change the number of degrees (-180 – +180), then press the
Enter button to save the selection.

Small Format Display

To setup the D9887B receiver to output a "Small Format Display," use the following
steps:
1 Use the Up and Down buttons to move the cursor to "Small Format Disp," then
press the Enter button.
2 Press the Enter button again to change the settings.
Format
1 While the cursor is on "Format," press the Enter button to change the display
format.
2 Use the Up and Down buttons to change from any of the format settings.
3 Press the Enter button to save the settings.
720x480i
720x480i
720x576i
720x576i
1280x720p
78-4043743-01 Rev A
16x9 29.97 1280x720p
4x3 29.97 1280x720p
16x9 25.00 1920x1080i
4x3 25.00 1920x1080i
16x9 50.00 1920x1080i
Video Output (1 RGBHV/YPbPr, 1 Composite) Option
16x9 59.94
16x9 60.00
16x9 25.00
16x9 29.97
16x9 30.00
41