Smpte 333M Configuration - Cisco D9887B Installation And Configuration Manual

Chapter 4 Using the Front Panel to Configure the D9887B HDTV Modular Receiver

SMPTE 333M Configuration

The D9887B receiver can be configured to output SMPTE 333M Closed Caption
signals from the SMPTE 333M port on the back of the unit.
1 Press the Menu button.
2 Use the Up and Down button to move the cursor to "SMPTE 333M," then press
the Enter button.
3 Press the Enter button one more time to edit "333M."
4 Use the Up and Down buttons to enable or disable SMPTE 333M, then press the
Enter button to save the selection.
162 78-4043743-01 Rev A