Specifications
Chassis environmental specifications
Specification
Temperature range
Operating
Nonoperating
Maximum wet bulb temperature
Operating
Nonoperating
Relative humidity (non condensing)
Operating
Nonoperating
1
All temperature ratings shown are for sea level. An altitude derating of 1°C per 304.8 m (1.8°F per 1000 ft) to 3048 m
(10,000 ft) is applicable. No direct sunlight allowed. Upper operating limit is 3,048 m (10,000 ft) or 70 kPa/10.1 psia. Upper
nonoperating limit is 9,144 m (30,000 ft).
2
Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for storage
corresponds to a pressure minimum of 70 kPa (10.1 psia).
Chassis specifications
Specification
Height
Depth
Width
Weight, fully loaded
Weight, empty
Power specifications
The power requirements for the HPE Apollo k6000 Chassis are met by the following components:
•
HPE 2650W Hot Plug Titanium Plus Power Supply
•
HPE 2650W 277VAC Hot Plug Power Supply
•
HPE 3400W 1U Hot Plug Power Supply
1
2
Value
10°C to 35°C (50°F to 95°F)
-30°C to 60°C (-22°F to 140°F)
28ºC (82.4ºF)
38.7ºC (101.7ºF)
10% to 90%
5% to 95%
Value
53.14 cm (20.92 in)
102.60 cm (40.39 in)
44.80 cm (17.64 in)
301.64 kg (665.00 lb)
66.68 kg (147.00 lb)
Specifications
49