HPE Apollo k6000 User Manual page 33

Population guidelines (10GbE Integrated Switch)
Install the data switch in bay 1 for the default configuration. If redundancy or a higher bandwidth is required,
install a second data switch in bay 2.
Population guidelines (HPE Apollo Ethernet 10GbE Pass-Thru Module)
Install the pass-thru module in bay 1 for the default configuration. If redundancy or a higher bandwidth is
required, install a second pass-thru module in bay 2.
When the pass-thru module is installed in bay 1, the ports and LEDs map to specific server bays as shown in
the following table.
QSFP+ Port
Port 1
Port 2
Port 3
Port 4
LED-to-Server bay mapping
LED 1–Server bay 13
LED 2–Server bay 1
LED 3–Server bay 14
LED 4–Server bay 2
LED 5–Server bay 15
LED 6–Server bay 3
LED 7–Server bay 16
LED 8–Server bay 4
LED 9–Server bay 17
LED 10–Server bay 5
LED 11–Server bay 18
LED 12–Server bay 6
LED 13–Server bay 19
LED 14–Server bay 7
LED 15–Server bay 20
LED 16–Server bay 8
Table Continued
Installing the chassis 33