Table of Contents
Advertisement
a. Make sure that the orientation of the release lever is correct for installation in bay 1 and is fully open.
b. Install the data switch, close the release lever, and then tighten the captive screw.
4. To install the data switch in bay 2:
a. Make sure that the orientation of the release lever is correct for installation in bay 2 and is fully open.
b. Install the data switch, close the release lever, and then tighten the captive screw.
Installing high-speed fabric switch options
The chassis supports installation of the following high-speed fabric switches:
•
HPE Apollo InfiniBand EDR 36-port Unmanaged Switch
•
HPE Apollo 100 Gb 48-port Intel Omni-Path Architecture Unmanaged Switch
36
Installing high-speed fabric switch options
Hide quick links:
Advertisement
Table of Contents
