Confirming Midi Information For Each Part (Info) - Roland XV-3080 Owner's Manual

Program Change (Program change switch)
This sets whether the Part will respond to received MIDI
Program Change messages (ON) or not (OFF).
Vol (Receive volume switch)
This sets whether the Part will respond to received MIDI
Volume messages (ON) or not (OFF).
Pan (Receive pan switch)
This sets whether the Part will respond to received MIDI Pan
messages (ON) or not (OFF).
Exp (Receive expression switch)
This sets whether the Part will respond to received MIDI
Expression messages (ON) or not (OFF).
Hld (Receive hold 1 switch)
This sets whether the Part will respond to received MIDI
Hold 1 messages (ON) or not (OFF).
Bnd (Receive bender switch)
This sets whether the Part will respond to received MIDI
Bender messages (ON) or not (OFF).
Mod (Receive modulation switch)
This sets whether the Part will respond to received MIDI
Modulation messages (ON) or not (OFF).
Caf (Receive channel aftertouch switch)
This sets whether the Part will respond to received MIDI
Aftertouch messages (ON) or not (OFF).
Paf (Receive polyphonic aftertouch switch)
This sets whether the Part will respond to received MIDI
Polyphonic Aftertouch messages (ON) or not (OFF).
CH VELO CRV (CH velocity curve)
Velocity Curve OFF/1/2/3/4
For each Part, you can select from among four velocity
curves to find the one that best matches the touch of the
MIDI keyboard connected to the XV-3080. Set this to "OFF" if
you are using the MIDI keyboard's own velocity curve.
Chapter 5 Creating a Performance
Phase Lock OFF/ON
This setting activates (ON) or de-activates (OFF)
synchronization of the timing of Parts that share a common
MIDI channel.
* When Part sounds are layered on top of each other as a result
of sharing a MIDI channel, there may be a discrepancy in their
timing. The Phase Lock feature can synchronize the sounds so
that they start precisely at the same time. However, since this
delays the sounds slightly to line them up, turn this feature off
when it is not needed.
Confirming MIDI Information
for Each Part (INFO)
In this display you can check the receive status of various
types of MIDI message for each Part. This is a convenient
way to check that the sound generator is responding
correctly to messages from the keyboard or external MIDI
controllers.
For items other than Voice, you may modify the values.
When you do so, a MIDI message will be transmitted, and
can be recorded on the sequencer, etc.
Mod (Modulation Information)
Breath (Breath Information)
Foot (Foot Information)
Vol (Volume Information)
Pan (Pan Information)
Exp (Expression Information)
Hold (Hold 1 Information)
Bend (Pitch Bend Information)
Aftertouch (Aftertouch Information)
Sys1(System Control 1 Information)
Sys2(System Control 2 Information)
Voices (Voice Information)
107